Set up Android 6.zero.1 September 2016 Software program OTA Replace for Exynos Samsung Galaxy S5 G900H

Image may be NSFW.
Clik here to view.

The official Android 6.zero.1 September safety and OTA Replace patch is now stay for all of the Galaxy S5 Exynos G900H units.

If you don’t want to attend till Samsung pushes the brand new firmware replace in your area, then you must verify the data on this publish in an effort to discover ways to efficiently flash this new customized ROM.

The replace is often launched in levels, which signifies that not all customers are going to obtain it concurrently others. In case you are a complicated consumer and also you’ve used ODIN app earlier than, then this tutorial ought to work easily for you.

Earlier than beginning set up it is advisable to verify the rules under:

• use this tutorial for the Exynos-based Galaxy S5 units solely.
  – your telephone’s mannequin needs to be the SM – G900H one.
  – verify the model of your gadget underneath Settings> About Telephone menu.
• don’t try and replace another units with the information that you can find on this article.
• obtain the Samsung USB drivers from here, then set up them in your pc.
  – the usb drivers are wanted by your PC, in order that it is going to be capable of detect your telephone whenever you’ll join it and run Odin software.
• for ODIN to work together with your system it is advisable set up the usb driver above, and to allow USB Debugging out of your telephone’s Developer Choices menu.
  – for those who can’t discover Developer Choices, then you must unhide it: go to Settings> About Telephone, faucet 7 occasions on the Construct Quantity textual content and you’ll unlock Developer mode.
  – return to Settings, scroll down and open Developer Choices> discover USB Debugging and allow it, too.
• the brand new Android 6.zero.1 could be flashed over rooted Galaxy S5 firmware, however you want to know that you’ll lose root entry utterly.
  – additionally, any customized Restoration picture you may need put in goes to get replaced with a inventory Restoration picture as an alternative.
• the Android 6.zero.1 may be flashed utilizing ODIN over customized ROMs, too.
  – you will want to FACTORY RESET the telephone’s system partition after the replace is flashed, as in any other case your telephone gained’t boot in regular mode.
  – the ‘manufacturing unit reset’ course of wipes clear the system partition, however it gained’t delete any knowledge from the interior storage of your system.
  – manufacturing unit resetting the system will make it boot in regular mode with the brand new official firmware.
  – the Manufacturing unit Reset steps are listed on the finish of this tutorial.
• in case your Galaxy S5 G900H telephone runs 100% inventory Android firmware, then you’ll be able to proceed straight to the subsequent a part of this publish, as no information will probably be misplaced within the course of.
• use the tutorial solely in case you are a complicated consumer, we can’t be held accountable in case you brick the telephone nor in case you lose any essential knowledge information within the course of.
• examine the entire submit first and don’t skip any steps.
• the battery cost of your telephone needs to be over 50%, in order that the Galaxy S5 gadget gained’t energy off in the course of the set up/ first boot means of Android 6.zero.1 replace.

In case you are not sure about utilizing the Odin app to replace your telephone manually, then you’ll be able to wait till Samsung pushes the brand new firmware replace over-the-air in your area.

The best way to set up Android 6.zero.1 September 2016 Replace for Galaxy S5 Exynos G900H:

1. Obtain the Android 6.zero.1 firmware replace archive from here.
   – save the file in your PC.
2. Extract the archived firmware information. You’ll acquire the G900HXXU1CPH5 tar.md5 firmware file, don’t extract its contents.
3. Obtain Odin three.10.7 from here.
   – unzip the Odin file in your PC.
4. Energy off the telephone.
5. Boot Galaxy S5 Exynos in Download Mode.
6. Open Odin exe in your PC.
7. Join your telephone to pc utilizing the usb cable.
   – look forward to Odin to detect the gadget.
   – if the telephone just isn’t detected you should reinstall the Samsung usb drivers.
8. Subsequent, go to Choices in Odin: be sure that RE-PARTITION is disabled.
   – don’t edit different Odin default settings.
9. Now you’ll be able to click on the AP button in Odin.
10. Browse your pc for the G900HXXU1CPH5 tar.md5 firmware replace file extracted at step 2. Load this file in ODIN.
11. Press START if you’re prepared to start the Android 6.zero.1 replace course of.
    – don’t press something throughout set up.
12. When Android 6.zero.1 is completed putting in your telephone will reboot in regular mode. Additionally, Odin ought to present the PASS alert sooner or later throughout restart.
13. Unplug the telephone from PC after the replace is completed, then use your default login information to unlock your telephone.

These have been all of the steps you needed to comply with to be able to full this new firmware replace on your gadget.

If set up was profitable you possibly can shut this information and proceed testing the brand new firmware. Please remember that this is perhaps one of many last Marshmallow builds that you will notice launched for the Galaxy S5 gadget, as Samsung will more than likely cease supporting firmware replace for this mannequin.

In case you’ve encountered issues throughout set up you want to examine the additional information under.

NOTE1:

If the FAIL message is proven by ODIN, or some other error impedes you from finishing this replace, then you’ll have to repeat the entire as soon as extra.

For those who repeat set up, you have to ensure that your Galaxy S5 telephone meets all necessities listed above the tutorial, and that you simply gained’t be skipping any steps.

NOTE2:

If the PASS message is proven by ODIN, however your Galaxy S5 Exynos telephone enters in a boot loop, or it will get caught on the boot animation display for greater than 30 minutes, then you will want to ‘manufacturing unit reset’ the system.

The ‘manufacturing unit reset’ steps are listed under and these could be utilized by people who have put in the brand new official Android 6.zero.1 replace over a customized ROM, too.

The ‘manufacturing unit reset’ will wipe the system partition, it shouldn’t delete any information from the interior storage of your gadget. Right here’s tips on how to manufacturing unit reset your system:

• energy off the Galaxy S5.
• boot in Recovery Mode.
• choose ‘wipe knowledge/ manufacturing unit reset’.
• affirm course of.
• now boot your telephone in regular mode once more.

For extra assist use the feedback subject under.