Flash Official Android 6.zero.1 Replace for US Mobile Galaxy S6 Edge Plus G928R4

The Android 6.zero.1 Marshmallow replace is now reside for all of the US Mobile Galaxy S6 Edge Plus fashions.

For those who haven’t acquired the brand new replace over-the-air otherwise you need to restore your telephone to inventory Android 6.zero.1 firmware, then it is best to verify the data listed on this submit and discover ways to manually full the replace.

Earlier than beginning set up you want to examine the rules under:

• use this publish just for the US Mobile variant of the Samsung Galaxy S6 Edge Plus fashions.
  – the mannequin model of your telephone needs to be SM – G928R4.
  – the model of your telephone could be discovered underneath Settings> About System part.
• don’t replace another totally different Android units with the information that you’ll discover on this publish.
• obtain the Samsung USB Drivers here, then set up them in your PC.
  – these drivers will permit the pc to detect your telephone via the Odin app.
• Odin is the software that you must use in an effort to full the brand new official replace manually.
  – for Odin to work in your PC you must set up the usb drivers above and to allow the USB Debugging from Developer Choices part of your telephone.
  – should you can’t discover the Developer Choices, then it is best to go to Settings> About Telephone and faucet 7 occasions on the Construct Quantity part.
  – return to Settings menu, scroll down and you can find the newly created Developer Choices menu.
  – open Developer Choices after which allow USB Debugging.
• you possibly can flash the replace over rooted firmware, however root entry will probably be eliminated after the replace is completed.
  – any customized Restoration picture goes to get replaced with a inventory Restoration picture.
• you’ll be able to set up the brand new replace utilizing Odin over customized ROMs, too.
  – in the event you set up over customized ROMs you will have to do a further course of like Manufacturing unit Reset.
  – the Manufacturing unit Reset steps are listed on the finish of this submit.
  – Manufacturing unit Resetting the smartphone goes to take away the previous customized ROM and permit official Android 6.zero.1 firmware as well in regular mode.
  – the Manufacturing unit Reset isn’t going to delete any knowledge from inner storage.
• in case your telephone is already operating a 100% inventory Android storage, then you will get straight to the tutorial, as no knowledge information are going to get replaced within the course of.
• examine the battery cost degree of your gadget and ensure that there’s at the least 50% cost left earlier than it powers off.
• this can be a information for superior consumer, we can’t be blamed in case you brick the telephone nor in case you lose any necessary knowledge information within the course of.

Because you’ve learn all the above you will get to the subsequent a part of this publish.

The best way to set up Android 6.zero.1 Marshmallow OTA Replace for US Mobile Samsung Galaxy S6 Edge Plus:

1. Obtain Android 6.zero.1 Marshmallow official firmware archive file here.
2. Extract the contents from the archive file and save them in your PC.
   – you need to acquire the G928R4TYU2BPE1 tar.md5 firmware file.
   – don’t unzip the information.
3. Obtain the Odin three.10.7 from here.
   – extract the contents from the zip file.
4. Energy off your telephone.
5. Boot it in Download Mode.
   – that’s a Obtain Mode boot information for Galaxy S6 Edge fashions, however it should work for the Edge Plus fashions, too.
6. Get to Odin’s fundamental display and open OPTIONS.
   – disable the Re-Partition choice.
7. Click on AP button in Odin in an effort to start the replace course of.
8. Discover the Android 6.zero.1 tar.md5 firmware and cargo it Odin.
9. Press START to start the brand new Marshmallow Android 6.zero.1 replace in your smartphone.
   – don’t press any buttons till all the brand new firmware information are carried out putting in.
10. When the replace is completed you’ll be able to see your system booting in regular mode and the PASS alert proven by Odin app.
11. Unplug your telephone from pc when the “optimizing display” display masses.
12. Use your default login information with a purpose to regain management over the system.

These have been all of the steps that you simply needed to take so as to full the brand new replace.

In case the brand new firmware isn’t put in or the FAIL alert is proven by ODIN, then you’ll need to attempt to repeat the entire information greater than as soon as.

If it’s essential repeat set up, then it’s a must to just remember to gained’t skip any steps and to be sure that your GalaxyS6 Edge Plus meets all necessities listed above the tutorial.

NOTE:

If the PASS alert is proven in ODIN, however your telephone enters in a boot loop or it will get caught on the boot animation display you’ll have to ‘manufacturing unit reset’ the system partition.

The Manufacturing unit Reset steps are listed under and it’s a must to use them in case the brand new Android 6.zero.1 official replace has been put in over a customized ROM, too.

Right here’s tips on how to manufacturing unit reset the gadget:

• energy off the telephone.
• boot it in Recovery Mode.
• choose ‘wipe knowledge/ manufacturing unit reset’.
• affirm course of.
• reboot your telephone in regular mode.

Should you want any additional assist finishing the tutorial you’ll be able to inform us in feedback.